DS-K5604A-3XF/V face recognition terminal is an access control device integrated with temperature screening function, which supports plug & play (rapid deployment, free of wiring, installation, or configuration). It can fast take skin-surface temperature, which can be widely applied in multiple scenarios, such as enterprises, stations, dwellings, factories, schools, campus and so on.
ADVANTAGES of Thermal Temperature Screening Technology
AI technology ensures tomographic cameras only detect human skin-surface temperature to reduce false alarms of other heat sources. Ÿ Compensation algorithm ensures the temperature is compensated with ambient temperature and the distance of the measured target for better accuracy. Thermal technology has been applied widely in temperature screening scenarios as it offers more flexibility and efficiency in preliminary screening of elevated skin surface temperatures.
Plug & play: Supports rapid deployment. Free of wiring, installation, or configuration
Supports Vanadium Oxide uncooled sensor to measure target's temperature
Temperature measuring range: 30 °C to 45 °C (86 °F to 113 °F), accuracy: 0.1 ° C, deviation: ± 0.5 °C (without black body calibration)
Recognition distance: 0.3 to 2 m
Fast temperature measurement mode: Detects face and takes temperature without identity authentication
Multiple authentication modes are available: card and temperature, face and temperature, card and face and temperature, etc
Face mask wearing alert: If the recognising face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance is valid.
Displays temperature measurement results on the authentication page
Forced mask wearing alert: If the recognising face does not wear a mask, the device will prompt a voice reminder. At the same time, the authentication or attendance will be failed
Triggers voice prompt when detecting abnormal temperature
Configurable door status (open/close) when detecting abnormal temperature
Transmits online and offline temperature information to the client software via TCP/IP communication and saves the data on the client software
Integrated design with stand bracket
Communicates with the third-party turnstile via IO output or Wiegand
Adjustable supplement light brightness
High performance processor with deep learning algorithm
50,000 face capacity and 100,000 event capacity
Face recognition duration ＜ 0.2 s/User; face recognition accuracy rate ≥ 99%
Transmits and saves the comparison results and the captured pictures to the client software or others
NTP, manually time synchronisation, and auto synchronisation
Watchdog design for protecting the device and ensuring device running properly
Audio prompt for authentication result
* In order to get an accurate temperature, after the device is powered on, you should wait for 90 min to warm the device up.
* Bio-metric recognition products are not 100% applicable to anti-spoofing environments. If you require a higher security level, use multiple authentication modes.
These products are intended for measuring persons temperature purely as an early detection system for the symptom of a high temperature only, further conclusive testing should be carried on anyone who triggers the high temperature warning of this device to determine the exact cause of the reading. This product is not capable of detecting any other symptoms other than a higher than normal temperature.
For quotes and installation click HERE
GA Technical Ltd
Eastbourne
East Sussex
CCTV and Security Systems
01323400152
Comments